Containers

We install containers to manage the transitional, finally LXE: https://wiki.debian.org/LXC

STEP 0 Install lxc

apt-get update apt-get install lxc

STEP 1 Create Let's create a 'Transitional' virtual machine, a container

lxc-create -n transitional -t debian

Start the container,deattach the container from the root terminal and change password of the container

START lxc-start -n transitional -d

OPEN lxc-console -n transitional

STOP lxc-stop -n transitional

---

ERRORS along the way which got solved

Could not find writable mount point for cgroup hierarchy 8 while trying to create cgroup.

We imagine that if we upgrade to jessie 8.8, that the Cgroup issue (=a subsystem in the linux kernell, which allows process separation) will be a resolved. For now we add the mountpoint. and follow this manual [1]

cat /etc/fstab

    cgroup  /sys/fs/cgroup  cgroup  defaults  0   0                                 

We mount manually, we do it easy by mount all mount -a

But it doesn't work.

lxc-checkconfig

So let's install all the packages ~ and see whether it works

apt-get install lxc libvirt0 libpam-cgroup libpam-cgfs bridge-utils

Check the configuration file nano /var/lib/lxc/transitional/config

STEP 2 How can a container access the network?

A container, has MAC adress, we need a bridge for networking, via dhcp, So the container get an ip, and give access to the server's internal network

Do we opt for static of dynamic ip's? the dhcp server can have static ip via host/ it is anyhow setup to give a unique ip to the MAC address of the container (guest). So the choice is obsolete.

/var/lib/lxc/<name>/config

   lxc.network.type = veth
   lxc.network.flags = up
   lxc.network.link = lxc-nat-bridge
   lxc.network.name = eth0
   lxc.network.ipv4 = 10.0.3.2
   lxc.network.ipv4.gateway = 10.0.3.1

Using /etc/network/interfaces, the bridge could be created simply:

iface lxc-nat-bridge inet static

   bridge_ports none
   bridge_fd 0
   address 10.0.3.1
   netmask 255.255.255.0

We will also add, /etc/network/interface, the iptable rules for your main 'out' interface (here eth0):

iface eth0 inet static

     ...
     up iptables -t nat -F POSTROUTING

     up iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

or

     iptables -A FORWARD -i eth0 -o lxc-nat-bridge -j ACCEPT                                                                                       |
     iptables -A FORWARD -i lxc-nat-bridge -o eth0 -j ACCEPT

Restart network interface

service networking restart

WARNING deprecated!!!!

Enable IPv4 forwarding by putting this in /etc/sysctl.conf:

net.ipv4.ip_forward=1

and then applying it using:

sysctl -p

STEP 3 How can we access via the internet a container?

Setup routing / (reverse) proxy system for networking, so depending on the different services (Living data, Nekrocemetery, Transitional) we create subdomains which direct you to the correct container.