Containers

We install containers to manage the transitional, finally LXE: https://wiki.debian.org/LXC

STEP 0 Install lxc

apt-get update apt-get install lxc

Generic commands to manipulate containers

Start the container,deattach the container from the root terminal and change password of the container

START lxc-start -n transitional -d

GET A ROOT PROMPT lxc-attach -n transitional

OPEN A CONSOLE lxc-console -n transitional

STOP lxc-stop -n transitional

LIST the containers and their IP lxc-ls -f

STEP 1 Prepare once the host network for containers

This operation just need to be done once

A container, has MAC adress, we need a bridge for networking, via dhcp,  So the container get an ip, and give access to the server's internal network

Do we opt for static of dynamic ip's? the dhcp server can have static ip via host/ it is anyhow setup to give a unique ip to the MAC address of the container (guest). So the choice is obsolete.

Using /etc/network/interfaces, the bridge could be created simply:

iface lxc-nat-bridge inet static bridge_ports none bridge_fd 0 address 10.0.3.1 netmask 255.255.255.0

We will also add, /etc/network/interface, the iptable rules for your main 'out' interface (here eth0):

iface eth0 inet static       ...       up iptables -t nat -F POSTROUTING       up iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE or       iptables -A FORWARD -i eth0 -o lxc-nat-bridge -j ACCEPT                                                                                       |       iptables -A FORWARD -i lxc-nat-bridge -o eth0 -j ACCEPT

Restart network interface service networking restart

---

STEP 2 Create and configure the container

Create the container lxc-create -n transitional -t debian

Configure its network

nano /var/lib/lxc/transitional/config

At least, you have to uncomment and adapt the lxc.network.ipv4 IP adresse and the lxc.utsname parameter

 lxc.network.type = veth
 lxc.network.flags = up
 lxc.network.link = lxc-nat-bridge
 lxc.network.name = eth0
 lxc.network.ipv4 = 10.0.3.9
 lxc.network.ipv4.gateway = 10.0.3.1

 lxc.rootfs = /var/lib/lxc/transitional/rootfs
 lxc.rootfs.backend = dir

 # Common configuration
 lxc.include = /usr/share/lxc/config/debian.common.conf

 # Container specific configuration
 lxc.tty = 4
 lxc.utsname = transitional
 lxc.arch = amd64
 lxc.start.auto = 1

STEP 3 Configure the host/front Apache to proxy the requests to the container

Setup routing / (reverse) proxy system for networking, so depending on the different services (Living data, Nekrocemetery, Transitional) we create subdomains which direct you to the correct container.

Example here with Transitional/Yunohost (ynh) container and services

Add the subdomain at Gandi

Or not, as there is a wildcard (*), all subdomains of anarchaserver.org will be directed to the front apache server on the IP of anarchaserver.org

Configure the hosts

Modify /etc/hosts on the root of the server

sudo nano /etc/hosts

Add :

10.0.3.9        transitional.anarchaserver.org

Create a first vhost on the front apache

sudo nano /etc/apache2/sites-available/ynh.conf

<VirtualHost *:80>
   ServerAdmin webmaster@localhost
   ServerName transitional.anarchaserver.org

   ErrorLog ${APACHE_LOG_DIR}/transitional-error.log
   CustomLog ${APACHE_LOG_DIR}/transitional-access.log combined

   ProxyPreserveHost       On
   ProxyRequests           Off

   ProxyPass / http://10.0.3.9/
   ProxyPassReverse http://10.0.3.9/ /

   <Proxy *>
          Order deny,allow
          Allow from all
   </Proxy>
   RewriteEngine on
   RewriteCond %{SERVER_NAME} =transitional.anarchaserver.org
   RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,QSA,R=permanent]
</VirtualHost>

Create the symbolic link between this file and the sites-enable folder so has to be taken into account by apache

sudo a2ensite /etc/apache2/sites-enable/transitional.conf

Restart Apache2

sudo systemctl reload apache2

Create a HTTPS Certificate with let'sencrypt (certbot)

See the existings certificates :

sudo certbot certificates

Create the certificate for the domain with apache server

sudo certbot --apache -d transitional.anarchaserver.org

You can choose to : "2: Secure - Make all requests redirect to secure HTTPS access"

That's it !

To check if the certificates needs to be renewed (and renew them)

sudo certbot renew

Restart Apache2

sudo systemctl reload apache2

Configure Apache to proxy the subdomain for HTTPS

Modify the vhost for ssl generated by certbot as below :

sudo nano /etc/apache2/sites-available/transitional-le-ssl.conf

<IfModule mod_ssl.c>
<VirtualHost *:443>
     ServerAdmin webmaster@localhost
     ServerName transitional.anarchaserver.org
     ErrorLog ${APACHE_LOG_DIR}/transitional-error.log
     CustomLog ${APACHE_LOG_DIR}/transitional-access.log combined
     ProxyPreserveHost       On
     ProxyRequests           Off
     <Proxy *>
         Order deny,allow
         Allow from all
     </Proxy>
     SSLEngine on
     SSLProxyEngine On
     SSLProxyVerify none
     SSLProxyCheckPeerCN off
     SSLProxyCheckPeerName off
     SSLProxyCheckPeerExpire off

     ProxyPass /  https://transitional.anarchaserver.org/
     ProxyPassReverse / https://transitional.anarchaserver.org/

  SSLCertificateFile /etc/letsencrypt/live/transitional.anarchaserver.org/fullchain.pem
  SSLCertificateKeyFile /etc/letsencrypt/live/transitional.anarchaserver.org/privkey.pem
  Include /etc/letsencrypt/options-ssl-apache.conf
  </VirtualHost>
  </IfModule>

Activate mod_ssl on Apache (as root)

sudo a2enmod ssl
sudo a2ensite /etc/apache2/sites-enabled/transitional-le-ssl.conf

Restart Apache2 (to activate ssl)

sudo systemctl restart apache2.service

OR

Reload Apache2 (if there is a problem, Apache will keep its configuration)

sudo systemctl reload apache2.service

STEP 4 How can we administrate this container

Access the container

• Log into anarchaserver and then type : (you need to be a user on this container to be able to login with ssh public key or root account)

sudo lxc-console -n transitional

• To access the container without an account

sudo lxc-attach -n transitional

Install and update things in the container

Once logged :

sudo apt-get update
sudo apt-get upgrade
sudo apt-get iputils-ping

Snapshot a container

Stop it first, and write a comment file

lxc-stop -n repository
echo "Snapshot before installing mediainfo" > repopiwigoquasiOK
lxc-snapshot -n repository -c repopiwigoquasiOK

To check the snapshot

lxc-snapshot -n repository -L

To delete a snapshot

sudo rm -rf /var/lib/lxc/repository/snaps/snapXXX/